Specifications
Designed For
OontZ Angle 3 Golf and OontZ Angle 3 Pro H2O Special Edition speakers
Mounting Method
Adjustable clamp mount with detachable speaker bracket
Mounts To
A bar or rail, such as on a golf cart or boat
What's Included
- OontZ Clamp Mount
- OontZ Speaker Bracket
- Thumb screw and adjustment knob
Attaching the Bracket to the Clamp Mount
- Place the bottom of the OontZ Speaker Bracket into the slots of the OontZ Clamp Mount.
- Insert the thumb screw into the Clamp Mount.
- Tighten the thumb screw to secure the bracket to the mount so the speaker stays in position.
Attaching the Speaker
- Loosen the adjustment knob on the back of the bracket until the bracket is wide enough to fit the bottom of the speaker.
- While holding the assembled bracket and mount, place the bottom of the speaker into the bracket so the curved portion of the bracket fits the curved bottom of the speaker. For the OontZ Angle 3 Golf speaker, there will be a small gap between the bottom of the speaker and the top flat surface of the bracket.
- Turn the adjustment knob on the side of the bracket until it firmly clamps to the speaker. Do not over-tighten, as this may damage the bracket.
Clamping to a Bar
Assemble the clamp mount to a bar on your golf cart, boat, or other location:
- Turn the knob on the OontZ Clamp Mount until the opening of the clamp fits around the bar.
- Place the opening of the clamp around the bar and tighten the knob until the clamp is firmly secured to the bar.
- When tightened, the speaker and clamp will stay in position.
Tips & Care
- If using in salt water environments, rinse the speaker, bracket, and mount with fresh water after use, wipe off the water, and place in a dry location.
- This routine helps keep the speaker, bracket, and mount from rusting over time.
- For questions, contact support at TheOontZ.com/support.
Frequently Asked Questions
Which speakers is this mount designed for?
It is designed specifically for the OontZ Angle 3 Golf and OontZ Angle 3 Pro H2O Special Edition speakers.
What can I clamp the mount to?
A bar or rail, such as on a golf cart or boat. Adjust the clamp knob so the opening fits around the bar, then tighten firmly.
There's a gap between the speaker and bracket. Is that normal?
Yes. For the OontZ Angle 3 Golf speaker there is a small gap between the bottom of the speaker and the top flat surface of the bracket. This is expected.
How tight should I make the adjustment knob?
Tighten the knob until the bracket firmly clamps to the speaker, but do not over-tighten, as that may damage the bracket.
How do I care for it after use in salt water?
Rinse the speaker, bracket, and mount with fresh water, wipe them dry, and store in a dry place to prevent rusting over time.
💬
Still need help?Our Customer Support Team is happy to assist with anything not covered here.
