OontZ Angle 3 (Gen 4)

Specifications

In the Package

• Portable Bluetooth speaker (OontZ Angle 3, Wireless Dual Stereo Model)
• USB Type-C charging cable
• Quick-Start Guide

Note: The USB Type-C charging cable is packed below the cardboard insert at the end of the triangle box. Slide out the insert to locate it.

Buttons & Controls

• Power button: press and release to turn on; press and hold for 2 seconds to turn off.
• Play/Pause button: press and release to pause or play.
• Volume Up: press and release to increase volume one level; repeat until the desired level.
• Volume Down: press and release to decrease volume one level; repeat until the desired level.
• Track Forward: press and hold the Volume Up button for 2 seconds.
• Track Back: press and hold the Volume Down button for 2 seconds.
• Bluetooth/Speakerphone button (dual function): used for pairing, speakerphone, and dual-speaker control.

Important: The volume on the speaker and your audio source work independently; set both to maximum for the loudest volume.

Important: Track back is application-dependent, and some apps may not support track back, track forward, or play/pause.

Lights

• Red Light (when charging): slowly flashing red means charging; solid red means fully charged.
• Blue Light (when speaker is on): flashing blue means pairing mode; solid blue means connected. It also turns solid blue when a 3.5mm cable is plugged into the AUX IN jack.
• White/Orange Light: lit when this is the second speaker connected in OontZ Dual Speaker mode.

Play Horizontally or Vertically

The speaker can be placed vertically (controls on top) or horizontally (controls on side).

• It has its own grille and a passive bass radiator that faces bass away from the dual precision stereo drivers, so the rich bass does not interfere with the mids and highs.

Turning On & Off

• To turn on: press and release the Power button. The Red Light turns on and then turns off after 3 seconds if playing from battery power.
• To turn off: press and hold the Power button for 2 seconds; the Blue Light turns off.
• Flashing blue means the speaker is on and in pairing mode; solid blue means it has connected to a device and is ready to play.

Pairing & Connecting

The OontZ Angle 3 can be connected to one device at a time and will automatically reconnect to the last device it was connected to when turned on and in range.

• On your device, go to Settings > Bluetooth and make sure Bluetooth is on.
• Select 'OontZ Angle 3 DS xxx' under DEVICES (xxx is 3 characters unique to your speaker).
• The Blue Light turns solid blue, a quiet chime plays, and you can play audio wirelessly.

To pair a different device, first disconnect the current one by holding the Bluetooth button for 3 seconds until the Blue Light flashes.

Your device must be within 100 unobstructed feet; move closer if you have trouble connecting. The speaker will not connect when the charge is too low.

Amazon Echo devices do not auto-reconnect; pair via the Alexa app, then say 'Alexa, connect my speaker' to reconnect.

AUX / 3.5mm Audio Cable

To play non-Bluetooth audio sources, use a 3.5mm audio cable.

• Plug one end into the AUX IN jack on the back of the speaker.
• Plug the other end into the headphone jack of your laptop, computer, or non-Bluetooth device, fully inserting both ends.

Important: Bluetooth is disabled while a 3.5mm cable is connected. Remove the cable to use Bluetooth.

Note: When the rubber flap is open for the cable, the speaker is not water resistant.

Battery & Charging

The rechargeable battery ships with a partial charge so the speaker is ready to play. For maximum playtime, fully charge it. You can play while charging.

• Insert the small end of the USB Type-C cable into the speaker's charging connector.
• Insert the larger end into a UL-listed USB wall charger (5V, 3.0A max) or a computer USB port.
• Up to 5 hours to fully charge a low battery.
• When charge drops below 15%, the Red Light flashes rapidly and volume decreases to preserve charge.

On battery power, the speaker turns off after 15 minutes of no audio. When plugged into a charging source it stays on until you power it off. (Exception: connected to Amazon Echo devices, the power-saving feature is disabled.)

Waterproofing (IPX5)

The OontZ Angle 3 is IPX5 water resistant. It can resist gentle water spray and splash but cannot be partially or fully submerged or left in a wet environment for an extended period, any of which could cause unrepairable damage.

• DO NOT allow the speaker to sit in water.
• DO NOT submerge the speaker fully or partially.
• Gentle water spray or splash is okay.
• The rubber flap must be closed to keep the speaker water resistant and dustproof.

Safety: When plugged into a charging source with the USB Type-C cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock. When charging or using a 3.5mm cable, keep the speaker away from water.

Wireless Hands-Free Speakerphone

The speakerphone feature works over Bluetooth with smartphones and iPhones only; it is not supported when connected to PCs, laptops, Apple Mac, or other device types.

• To answer or end a call: press and release the Bluetooth button.
• To reject an incoming call: press and hold the Bluetooth button for 3 seconds.
• Keep the speaker close in front of you so you can be heard clearly.
• You can use your phone to switch between hands-free speakerphone and the phone itself.

OontZ Dual Speaker (Stereo & Dual Mode)

With a second OontZ Angle 3 (sold separately) you can play music wirelessly through both speakers up to 66 feet apart.

• Turn on both speakers.
• Pair and connect one speaker to your device (solid blue); this becomes the Play Control Speaker.
• The second speaker must not be connected to any device; its Blue Light must be flashing. If solid blue, disconnect it by holding the Bluetooth button for 3 seconds.
• On the Play Control Speaker, hold the Play/Pause button for 3 seconds until it says 'Dual Pairing'.
• After a few seconds it says 'Left Channel' and the second speaker says 'Right Channel' (its light turns solid white). The speakers are now connected for stereo separation.

Use the Play Control Speaker's buttons and Bluetooth/AUX connection; these controls are disabled on the second speaker while paired. Speakerphone call audio plays only through the Play Control Speaker.

Dual Mode: Use Dual Mode to place the two speakers in different areas playing the same music. With the speakers connected for Left Channel - Right Channel, quickly press the Bluetooth button twice on the Play Control Speaker; the second speaker light turns solid orange and both say 'Dual Mode'. To return to Left/Right, press the Bluetooth button twice again (light returns to solid white).

Playing video audio in Dual Speaker mode is not recommended, as it causes the audio and video to play out of sync.

To disconnect the two speakers, with both turned on, hold the Play/Pause button on the Play Control Speaker for 3 seconds.

Resetting

• Step 1: Remove the USB Type-C charging cable and 3.5mm audio cable, if connected.
• Step 2: Press and hold the Power button and the Bluetooth button together for 1 second, then release.
• Step 3: The speaker has now been reset and you can turn it on.

Safety & Precautions

• When plugged into a charging source with the USB Type-C cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.
• Read and follow all instructions.
• Protect the USB Type-C charging cable from being pinched, particularly at the connectors. Unplug it during lightning storms or when unused for long periods.
• Do not place the speaker near heat sources such as radiators, stoves, or amplifiers, or near naked flames such as lighted candles.
• Do not expose the speaker to excessive heat (e.g., direct sunlight or fire).
• The battery is not replaceable; do not attempt to change it. If it leaks, avoid skin and eye contact and seek medical advice if contact occurs.
• Use only an agency-approved power supply that meets local regulatory requirements (UL, CSA, VDE, CCC).
• Do not make alterations to the speaker. Refer all servicing to qualified personnel.

Frequently Asked Questions